HORIZON HG3

$199.00

The BeStableCam Gimbal HORIZON H4 is a 3-axis handheld camera stabilizer designed for mirrorless cameras to achieve smooth, stable footage. The HORIZON H4 uses brushless gimbal motors to stabilize movement on tilt-and-roll axis and provide incredibly smooth image capture while shooting handheld, while walking, or in any situation in which the camera is moving.

SKU: CG03674 Categories: , , ,

Description

Capture smooth video

HORIZON HF3 技术参数

总体特性

内置功能
  1. 三种工作模式
    -便携悬挂
    -上下倒置
    -手提模式
  2. 内置独立 IMU 模块
  3. DJI 专用云台伺服驱动模块
  4. 蓝牙模块
  5. USB 接口
  6. 2.4GHz 接收机
  7. 温度传感器
  8. DJI 高级 32 位 DSP 处理器
  9. D-Bus 支持

外围设备

可搭载相机尺寸 相机重心到横滚轴的最大水平长度为 120mm
相机宽度不超过 160mm
高度不超过 195mm
配件电源接口 12V P-TAP x 2; USB 500mW x 1; DJI Lightbridge x 1
GCU输入电源 4S Ronin-M 智能电池
支持接口类型 2.4GHz 遥控器; 蓝牙 4.0; USB 2.0
调参软件安装要求 Windows XP SP3; Windows 7; Windows 8 (32 or 64 位); Mac OS X 10.9及以上
移动设备软件安装要求 iOS 7.0 及以上, Android 4.3 及以上

机械 & 电子特性

工作电流 静态电流: 300mA (@16V)
动态电流: 600mA (@16V)
堵转电流: 最大10A (@16V)
续航时间 3小时
工作环境温度 -15° C ~ 50° C (5° F ~ 120° F)
重量 2.3kg (5.07磅),含把手重量
尺寸 500mm(W) x 210mm(D)x 420mm(H)

工作特性

负载重量(参考值) 3.6kg (8磅)
角度抖动量 ± 0.02°
最大可控转速 旋转方向: 90°/s
俯仰方向: 100°/s
横滚方向: 30°/s
机械限位范围 旋转方向: 360°
俯仰方向: +105° /-190°
横滚方向: ± 110°
可控转动范围 旋转方向: 360°
俯仰方向: +105° /-190°
横滚方向: ± 25°

HORIZON HF3 下载

文档与手册

  • Ronin-M 发布记录 ZIP PDF
  • Ronin-M 快速入门指南 v1.6 ZIP PDF
  • Ronin-M 用户手册 v1.6 ZIP PDF

软件和驱动(SOFTWARE & DRIVERS)

iOS 版本 v1.1.28
Android 版本 v1.1.0
* *建议通过扫描二维码进行下载(移动设备要求:iOS 7.0 及以上;Android 4.3 及以上,需支持蓝牙4.0)

OVERVIEW

The BeStableCam Gimbal HORIZON H4 is a 3-axis handheld camera stabilizer designed for mirrorless cameras to achieve smooth, stable footage. The HORIZON H4 uses brushless gimbal motors to stabilize movement on tilt-and-roll axis and provide incredibly smooth image capture while shooting handheld, while walking, or in any situation in which the camera is moving. The HORIZON H4 can support up to 1200 grams of camera. A number of cameras are well-suited for the HORIZON H4 including the Sony a7S, Panasonic GH4, Blackmagic Pocket Cinema Camera. The built-in 5-way joystick control offers complete command over pan/tilt and mode choice. Select  from “Follow,” “Lock,” and adjust Pan-and-Tilt. Included with the stabilizer is a quick-release balance plate, a USB cable for charging, and a travel case.

The HORIZON H4 has advanced encoders, and a deep list of features that give a filmmaker the power to create a limitless range of professional camera movement. The HORIZON H4’s value and advanced features make it the one of the best camera stabilizer under $600.

NEW FEATURES:

- Built-in Frame IMU Current sensor to mesure battery power consumption

- Dedicated 3x SPI/PWM ports for encoder connection

- Additional I2C port to connect 2nd IMU or encoders

- Built-in sound beeper

- Up to 6s LiPo battery is supported

- Come with 2.4G wireless joystick control

- Long press the joystick button to get back to center

- Quick to mount on drones or Jibs

Operation Modes:

Mode 1: Heading Follow Mode – The Camera slowly tracks your movements.

Mode 2: Heading Lock Mode – The operator can‘t move any direction and camera stays locked in one position.

Mode 3: Heading and Pitch Follow Mode – The Camera slowly tracks your movements on pan and tilt axis.

*Modes can also be customized in the software. Other example modes: inverted mode,set tilt angles by hand, faster follow mode...An inverted mode can be achieved by flipping the gimbal upside-down in any mode

HORIZON H4 Camera Stabilizer Operating Steps:

- Press once: Heading and Ptich Follow mode;

- Press twice:    Heading Follow mode;

- Press 3 times: Lock Mode

- Press 4 times: RC Mode

- Press 5 times: Manually Set tilt angles by hand.

- Long press the joystick button to get back to center

Supported Cameras:

- Supported maximum camera package 1.2kg when balanced perfectly.

- Sony A7sII, A7RII, A7.

- A6300, A6000.

- RX100IV.

- RX10.

- GH4, G7.

- NEX.

- DMC.

- BMPCC.

- Samsung NX1.

Package included:

1x HORIZON H4 Camera Stabilizer 3 Axis Mirorrless Camera Stabilizer

1x Gimbal Tuning Stand

1x Wireless Joystick

1x Battery Pack

1x Battery Charger

NOTE: Please be noted that the Camera is not included

*Although the HORIZON H4 Camera Stabilizer is tested with a camera before shipping, it does not come pre-tuned or balanced for your specific camera setup. Customers will be responsible for tuning and balancing their camera. We can provide example profiles upon request.